The IFC2-3030 is an intelligent Fire Alarm Control Panel designed for medium- to large-scale facilities. Fire emergency detection and evacuation are extremely critical to life safety, and the IFC2-3030 is ideally suited for these applications.
The IFC2-3030 is ideal for virtually any application because it features a modular design that is configured per project requirements. With one to ten Signaling Line Circuits (SLCs), the IFC2- 3030 supports up to 3,180 intelligent addressable devices.
Information is critical to fire evacuation personnel, and the IFC2- 3030’s large 640-character Liquid Crystal Display (LCD) presents vital information to operators concerning a fire situation, fire progression, and evacuation details.
A host of other options are available, including single- or multichannel voice; firefighters telephone; LED, LCD, or PC-based graphic annunciators; fire or integration networking; advanced detection products for challenging environments, and many additional options.
Features
• One to ten isolated intelligent Signaling Line Circuits (SLC) Style 4, 6 or 7.
• Up to 159 detectors (any mix of ion, photo, laser photo, thermal, or multi-sensor) and 159 modules (N.O. manual stations, two-wire smoke, notification, or relay) per SLC. 318 devices per loop/3180 per FACP or network node.
• Large 640-character LCD backlit display (16 lines x 40 characters) or display-less (a node on a network).
• Network option – supports IFC-640, IFC-3030, IFC2-3030, IFC200, IFC-400, IFC1010, IFC2020, IFW Intelligent Fire Workstation, or JNCA-2 Network Annunciator.
• Built-in Alarm, Trouble, Security, and Supervisory relays.
• VeriFire® Tools online/offline program option.
• Application code is saved in Flash memory, eliminating the need to change EPROMs.
• Built-in Degraded Mode option. In the event of a CPU failure, the system is capable of general alarm if a fire condition is present.
• Weekly Occupancy Schedules allow changing sensitivity by time of day and day of week.
• Optional universal 2040-point DACT.
• EIA-485 annunciators, including custom graphics.
• History file with 4000-event capacity in nonvolatile memory, plus separate 1000-event alarm-only file.
• Advanced history filters allow sorting by event, time, date, or address.
• Alarm Verification selection per point, with tally.
• Autoprogramming and Walk Test reports.
• Positive Alarm Sequence (PAS) Presignal.
• Silence Inhibit and Auto Silence timer options.
• Field-programmable on panel or on PC, with VeriFire Tools program, also check, compare.
• Non-alarm points for lower priority functions.
• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.
• Powerful Boolean logic equations — 1000!
• Supports SCS Series smoke control system in both HVAC or FSCS modes.
• EIA-232 printer port.
• EIA-485 annunciator port.
Introduction
Product Overview
